(*chuunnappusabuuufa*) WITH power amplifier �gE703TSW"	5/4 channel power amplifier �gEA3532"

Fujitsu Ten (The headquarters:Kobe City president:this hammer —²Œõ(unknown word) capital:5,300,000,000 (Inc.)yen) will put 1 model of (*sabuuufa*) and 2 models of the amplifier on the market to car AV& navigation system "ECLIPSE (*ikuripus*)" one by one on November 10.

5.1ch theater system has reinforced the commodity lineup of (*kahnabigeishon*) with built-in 5.1ch decoder and car audio by the spread of the DVD video etc. by not only home audio but also car AV market in the expansion tending and our company.

(*sabuuufa*) put on the market at this time and the power amplifier are a suitable specifications for 5.1ch system improvement, and I will answer needs for 5.1ch car theater system to which it is forecast to be going to expand more and more in the future.

(*chuunnappusabuuufa*) �gE703TSW" installs a large power magnetic circuit, and drives caliber 20cm (*uufayunit*) with the built-in power amplifier of 120W or less. A heavy bass with the speed feeling and the presence is reproduced by sound load baffle (HPSB:HighPressure Speed Baffle) adoption. A low region full reproduction of 5.1ch source not to mention the heavy bass reinforcement when music reproduces can be achieved, and best (*chuunnappusabuuufa*) for the system improvement to 5.1ch car theater.

Moreover, the bass volume can be easily additionally adjusted while it is in the driver seat by the remote control of the attachment to the reproducing source such as music CD and DVD videos.

[It] equips it with "Amplifier crossover", and power amplifier �gEA3532" and �gEA2212" can be adjusted the belt region of best different in each speaker in detail, and correspond to all speaker systems flexibly. Moreover, the speaker output of a main unit can be connected as an input of the amplifier even when there is no (*puri*) output for a main unit, and the system can improve easily.

�y new commodity list �z

�y main feature of commodity �z

- Sound load baffle (HPSB:High Pressure Speed Baffle) adoption

Speed feeling and a heavy bass with the presence are reproduced by the air's compressed between the baffle board on the hemisphere side along the curve of the speaker corn and the speaker corn discharging from the slit opening at a stretch, and producing the flow of air like the jet engine.

- Sound load baffle (HPSB:High Pressure Speed Baffle) adoption

- Large-scale, magnetic circuit (*uufayunit*) adoption

A large-scale magnet of ƒÓ120mm has been adopted in ƒÓ20cm (*uufayunit*) which is the engine where a heavy bass is generated. In addition, powerful driving power was achieved by ƒÓ50mm (*dyuaruboisukoiru*).

- (*waiyahdorimokon*) attachment

It can be adjusted while it is in the driver seat by the remote control adjustment to the best bass volume. Even if the amount of the bass obtained by the source such as CD (music) and DVD (movie) is different, it is possible to adjust it easily.

- High density MDF cabinet adoption

An unnecessary vibration is excluded by adopting molded high density MDF in the cabinet by compressing the wood crushed in detail, and a clear heavy bass is reproduced.

- Changeable low-pass filter adoption

Can it be assumed 80-190Hz changeable type, and adjust the bass feeling which suits one's taste by the match with other speakers.

- Phase switch switch adoption

It is possible to make the outline of a low region depending and clearly by setting in the best phase.

- High level (Input two systems:RCA connection and speaker cable connection for input)

The speaker output of a main unit can be connected as an input of (*uufa*) even when there is no (*puri*) output for a main unit.

- Dynamic (*sutairing*) with power

*** The shape of the sound load baffle by which the sound with the speed feeling is emitted appeals, and [it] works out the design with (*sutairing*) that <heavy bass as (*sabuuufa*)> image is dynamic.

- "Amplifier crossover" by which belt region of best can be adjusted

Only a high region is output to �gEA3532" and the high passing by which a low region is cut is built into. The high passing can be adjusted within the range of 50-200Hz. Only a low region is output to the speaker, and the low passing by which only a high region is cut is built into �gEA2212". The low passing can be adjusted within the range of 50-200Hz. The belt region of best different in each speaker can be adjusted in detail, and [it] corresponds to all speaker systems flexibly.

- With built-in "Intelligent protection circuit" operation of protection mode when trouble is perceived

[It] enters the protection mode when the excess current of overheating and the power supply is observed by an electronic support, and the numerical value which exceeds the range of the allowance is measured, and the amplifier and the system are defended from the breakdown. Moreover, the voice signal is not by way of the protection circuit, and does not mix the noise by an independent design of the protection circuit and the voice route.

- Switching element �gMOS-FET" adoption by which efficiency is greatly improved

�gMOS-FET" is adopted in the large current switching regulator element of the DC/DC converter, and efficiency and the characteristic have been improved. Moreover, [it] corresponds to the power supply transformer without the stress when large power reproduces by having used (*toroidarukoa*).

- For high-level input

The speaker output of a main unit can be connected as an input of the amplifier even when there is no (*puri*) output for a main unit.

- An unnecessary noise below with built-in (*sabusonikkufirutah*) and ‰Â’®‘шæ(unknown word) (25Hz) is cut.

The speaker is protected while keeping the high pitched sound quality by suppressing an unnecessary vibration of the speaker.

- The switch of (*sabuuufa*) input signal or reception desk input signal (L+R) is possible (EA3532).

(*uufa*) can be output even when there is no (*sabuuufa*) output for a main unit.

- The addition of the power amplifier is possible (EA3532).

�gEA3532" is equipped with (*puriautokurosuohbah*). The filter which can adjust the low passing within the range of 50-200Hz is built into. Another amplifier for (*sabuuufa*) can be able to be connected, expand a heavy bass, and enhance it.